Request for Quotations (RFQ): Printing Services for 2020

Request for Quotations (RFQ) 
RFQ Number: ICTEC-2020-001
Issuance Date: 07.04.2020 
Deadline for Offers: 21.04.2020 
Description: Print services 
For: Moldova ICT Excellence Center Project (ICTEC) 
Funded By:United States Agency for International Development (USAID), Contract No. AID-117-A-15-00002 
Issued by:National Association of Private ICT Companies (ATIC) 
ATIC Point of Contact:, contact person Felicia Maiorschi, Client Relations/Facilities Manager 
Section 1: Instructions to Offerors 
Introduction: The National Association of ICT Companies (ATIC) is soliciting proposals from eligible and responsible firms regarding the supply of print services, as described below in Section 1 (Instruction to Offerors). The ICTEC Project is an official program of the United States Agency for International Development (USAID), Contract Nr. AID-117-A-15-00002, and is being carried out in Republic of Moldova. 
The ICTEC Project is a USAID program implemented by the National Association of ICT Companies (ATIC). The project will be implemented as a private-public partnership (though Global Development Alliances instrument (GDA)), between the Moldovan Government, private industry, academia and donors. The private partners include multinational companies, IBM and Microsoft, and also Moldovan Association of Private ICT Companies (ATIC) members that are local (operated) ICT companies. The private partners will bring significant new resources, ideas, software, technologies and development activities, such as trainings, practical assignments, and mentorship. The private sector partners will have the chance to use the center to communicate with the university, SMEs, startups, professionals and contribute to the curricula improvement answering the market needs, as well as the improvement of the IT and entrepreneurship ecosystem that will lead to the economic growth of the country. The Government of Moldova supports this project at the highest level of the Prime Minister, and the partners include Ministry of ICT, Ministry of Education, and E-Government Center. The space will be provided by the Technical University, as part of the Government commitment to this project. The e-Government Center will use the center as a training and capacity building resource for the public e-transformation and IT managers. 
Offerors are responsible for ensuring that their offers are received by ATIC in accordance with the instructions, terms, and conditions described in this RFQ. Failure to comply with the instructions described in this RFQ may lead to the disqualification of an offer. 
Offer Deadline and Protocol: Offers must be received no later than 17:00 local Chisinau time on April 21, 2020 electronically and/or in hard-copy at the Moldova ICT Excellence Center Project office.  
Any email offers must be sent to the following address: 
In attention of Mrs. Ana Chirita, 
Senior Projects Director ICTEC Project 
Any hard copy offers must be stamped and signed by the offeror’s authorized representative and delivered to the following address: 
In attention of Mrs. Ana Chirita, 
Senior Projects Director ICTEC Project 
Moldova ICT Excellence Center Project 
Str. Maria Cibotari 28, of 1B 
Please reference the RFQ number in any response to this RFQ. Offers received after the specified time and date will be considered late and will be reviewed only at ATIC discretion 
1.      Questions: Questions regarding the technical or administrative requirements of this RFQ may be submitted no later than 17:00 local Chisinau time on March 23, 2020 by email to Questions must be submitted in writing; phone calls will not be accepted. Questions and requests for clarification—and the responses thereto—that ATIC believes may be of interest to other offerors will be circulated to all RFQ recipients who have indicated an interest in bidding.  
Only the written answers issued by ATIC will be considered official and carry weight in the RFQ process and subsequent evaluation. Any verbal information received from employees of ATIC or any other entity should not be considered as an official response to any questions regarding this RFQ. 
2.      Specifications: Section 3 contains the technical specifications of the required items. All commodities offered in response to this RFQ must be new and unused. In addition, all electrical commodities must operate on 240V, 50Hz.  
Please note that, unless otherwise indicated, stated brand names or models are for illustrative description only. An equivalent substitute, as determined by the specifications, is acceptable. 
3.      Quotations: Quotations in response to this RFQ must be priced on a fixed-price, all-inclusive basis, including delivery and all other costs. Pricing must be presented in MDL.  Offers must remain valid for not less than thirty (30) calendar days after the offer deadline. Offerors are requested to provide quotations on their official quotation format or letterhead; in the event this is not possible, offerors may complete the table in Section 3. 
In addition, offerors responding to this RFQ are requested to submit the following: 
  • Organizations responding to this RFQ are requested to submit a copy of their official registration or business license. 
4.      Delivery: The delivery location for the items described in this RFQ is 9/11, Studentilor str., Chisinau. As part of its response to this RFQ, each offeror is expected to provide an estimate (in calendar days) of the delivery timeframe (after receipt of order). The delivery estimate presented in an offer in response to this RFQ must be upheld in the performance of any resulting contract. 
5.      Source/Nationality/Manufacture:  
Offerors may not offer or supply any commodities or services that are manufactured or assembled in, shipped from, transported through, or otherwise involving any of the following countries: Burma (Myanmar), Cuba, Iran, North Korea, (North) Sudan, Syria. 
6.      Warranty: The warranty coverage must be valid on all commodities for a minimum of twelve (12) months after delivery and acceptance of the commodities, unless otherwise specified in the technical specifications.   
7.      Taxes and VAT  
The agreement under which this procurement is financed does not permit the financing of any taxes, VAT, tariffs, duties, or other levies imposed by any laws in effect in the Cooperating Country.  No such Cooperating Country taxes, VAT, charges, tariffs, duties or levies will be paid under an order resulting from this RFQ. In the event that any exempt charges are paid by the Subcontractor, they will not be reimbursed to the Subcontractor by ATIC.  The Subcontractor shall immediately notify ATIC if any such taxes are assessed against the Subcontractor or its subcontractors/suppliers at any tier. The Subcontractor is responsible for payment of all applicable taxes, as prescribed under the applicable laws, associated with wages/salaries/compensation for services rendered by individuals employed by the Subcontractor and who are directed to work as required under this Subcontract.  The Subcontractor is liable for payment of all applicable taxes associated with revenues (profit), and other such taxes, fees, or dues for which Subcontractor is normally responsible as a result of operating its business. 
8.      Eligibility: By submitting an offer in response to this RFQ, the offeror certifies that it and its principal officers are not debarred, suspended, or otherwise considered ineligible for an award. 
9.      Evaluation and Award: The award will be made to a responsible offeror whose offer follows the RFQ instructions, meets the eligibility requirements, and and meets or exceeds the minimum required technical specifications, and is judged to be the best value based on a lowest-price, technically-acceptable basis, business experience, the visual aspect of the work to be performed, similar objects in the past and short production and installation terms. 
Please note that if there are significant deficiencies regarding responsiveness to the requirements of this RFQ, an offer may be deemed “non-responsive” and thereby disqualified from consideration. ATIC reserves the right to waive immaterial deficiencies at its discretion. 
Best-offer quotations are requested. It is anticipated that award will be made solely on the basis of these original quotations. However, ATIC reserves the right to conduct any of the following: 
·        ATIC may conduct negotiations with and/or request clarifications from any offeror prior to award. 
·        While preference will be given to offerors who can address the full technical requirements of this RFQ, ATIC may issue a partial award or split the award among various suppliers, if in the best interest of the Project. 
·        ATIC may cancel this RFQ at any time. 
Please note that in submitting a response to this RFQ, the offeror understands that USAID is not a party to this solicitation and the offeror agrees that any protest hereunder must be presented - in writing with full explanations - to the ICTEC Project for consideration, as USAID will not consider protests regarding procurements carried out by implementing partners. ATIC, at its sole discretion, will make a final decision on the protest for this procurement. 
10.   Terms and Conditions: This is a Request for Quotations only. Issuance of this RFQ does not in any way obligate ATIC or the ICTEC Project to make an award or pay for costs incurred by potential offerors in the preparation and submission of an offer. 
This solicitation is subject to ATIC’s standard terms and conditions. Any resultant award will be governed by these terms and conditions; a copy of the full terms and conditions is available upon request. Please note the following terms and conditions will apply: 
Payment No. 
Corresponding Deliverable Name 
Payment Amount 
In 15 days after signing the contract 
30 % of subcontract fixed price 
In 15 days after delivery of the services and receipt of the services and goods 
70 % of subcontract fixed price 
b)    Payment will be made in MDL, via wire transfer to the account specified in the Subcontractor’s invoice.  Payment of unpaid balances will be made upon completion and final acceptance of all works and deliverables by ATIC. Any invoices for services rendered and deliverables submitted - but not accepted by ATIC - will not be paid until the Subcontractor makes sufficient revisions to the deliverables such that ATIC may approve the deliverables and thus the invoice. 
c)   Payment will only be issued to the entity submitting the offer in response to this RFQ and identified in the resulting award; payment will not be issued to a third party. 
d)    Any award resulting from this RFQ will be firm fixed price, in the form of a purchase order. 
e)    No goods or services may be supplied that are manufactured or assembled in, shipped from, transported through, or otherwise involving any of the following countries: Burma (Myanmar), Cuba, Iran, North Korea, (North) Sudan, Syria. 
f)     Any international air or ocean transportation or shipping carried out under any award resulting from this RFQ must take place on U.S.-flag carriers/vessels. 
g)    United States law prohibits transactions with, and the provision of resources and support to, individuals and organizations associated with terrorism. The supplier under any award resulting from this RFQ must ensure compliance with these laws. 
h)    The title to any goods supplied under any award resulting from this RFQ shall pass to ATIC following delivery and acceptance of the goods by ATIC. Risk of loss, injury, or destruction of the goods shall be borne by the offeror until title passes to ATIC. 
 Section 2: Offer Checklist 
To assist offerors in preparation of proposals, the following checklist summarizes the documentation to include an offer in response to this RFQ: 
□ Cover letter, signed by an authorized representative of the offeror (see Section 4 for template) 
□ Official quotation, including specifications of offered equipment (see Section 3 for example format) 
□ Copy of offeror’s registration or business license (see Section 1.5 for more details) 
□ Bank Account Award Certificate - copy - issued by the bank holding the account; 
□ Certificate of regular payment of taxes - copy - or certificate issued by the Tax Inspectorate on double taxation records; 
□ The financial report for the last year - copy - confirmed by the signature and seal of the offeror. 
 Section 3:  Letter of Transmittal 
The following cover letter must be placed on letterhead and completed/signed/stamped by a representative authorized to sign on behalf of the offeror, as part of the Technical Volume: 
To:Moldova ICT Excellence Project 
Str. Maria Cibotari 28, of 1B      
Reference: RFP No. ICTEC-2016-012 
To Whom It May Concern: 
We, the undersigned, hereby provide the attached offer to perform all work required to complete the activities and requirements as described in the above-referenced RFP. Please find our offer attached. 
We hereby acknowledge and agree to all terms, conditions, special provisions, and instructions included in the above-referenced RFP. We further certify that the below-named firm—as well as the firm’s principal officers and all commodities and services offered in response to this RFP—are eligible to participate in this procurement under the terms of this solicitation. 
Furthermore, we hereby certify that, to the best of our knowledge and belief: 
·        We have no close, familial, or financial relationships with any ATIC or ICTEC project staff members; 
·        We have no close, familial, or financial relationships with any other offerors submitting proposals in response to the above-referenced RFP; and 
·        The prices in our offer have been arrived at independently, without any consultation, communication, or agreement with any other offeror or competitor for the purpose of restricting competition. 
·        All information in our proposal and all supporting documentation is authentic and accurate. 
·        We understand and agree to ATIC’ prohibitions against fraud, bribery, and kickbacks. 
We hereby certify that the enclosed representations, certifications, and other statements are accurate, current, and complete. 
Authorized Signature:  
Name and Title of Signatory:  
Company Name:  
Company Address:  
Company Telephone and Website:  
Company Registration or Taxpayer ID Number:  
Does the company have an active bank account (Yes/No)?  
Official name associated with bank account (for payment):  
Section 4: Specifications and Technical Requirements 
The table below contains the technical requirements of the commodities/services. Offerors are requested to provide quotations containing the information below on official letterhead or official quotation format. In the event this is not possible, offerors may complete this Section 3 and submit a signed/stamped version to ATIC. 
Line Item 
Description and Specifications 
Items and Specifications Offered 
Unit Price 
TVA 0% 
Total Price 
TVA 0% 
Production of tailored T-shirts with logo and text in front 
Colors: White, Black 
Fabric composition: 100% cotton 
Printing: full  
Printing size: 210 × 297mm mm  
Women sizes (S, M, L) 
Men sizes (M, L, XL, XXL) 
(Various design for different projects) 
Production of tailored T-shirts with logo and text in front, and text in the back 
Colors: White, Black, Yellow, Green, Blue 
Fabric composition: 100% cotton 
Printing: one color 
Printing size: 6.5x5.5 cm and 18x3 cm 
Women sizes (XS, S, M, L) 
Men sizes (M, L, XL, XXL) 
(Various design for different projects) 
Production of hoodies with logo and text in front and in the back 
(Various design for different projects) 
Print Banners used for roll-ups: 0,8 x 2 m 
Print Banners 
Banner size: 3 x 5 m 
Colors: White, Black 
Printing: full color 
Printing size: 3.5 x 1.5 cm  
Printing: full color 
Paper size: 15 x 21 cm 
(8 pages) 
Paper weight: 150 gr 
Size: 1/3 A4 
Paper weight: 150 gr 
Format: A4 
Printing: full color 
Invitations A5 
Trophies of different size and shapes  
Posters A3 
Delivery Costs: 
Other Costs (Describe :______________________) : 
Delivery time (after receipt of order):  calendar days 
Length of warranty on offered equipment:  years 
Location of service center(s) for after-sales service, including warranty repair: